SPE Product

Characteristics

Magcom designed SPE product describes the transmission of Ethernet over only one pair of copper wires.

Applications

In addition to data transmission via Ethernet, SPE also enables a simultaneous power supply of terminal devices via PoDL - Power over Data Line. Previously, this required two pairs for Fast Ethernet (10/100M Base-T1 or 1000M Base-T1) and four pairs for Gigabit Ethernet. SPE now opens up completely new possibilities and fields of application for Industrial Ethernet.

Part No.	Pins	Type	Pin pitch	Turn ratio	OP Temp.	Notes	Data sheet
SPEC2001	2	DIP	2.8	NA	-40℃ to +85℃	IP20
SPEC2002	10	DIP	See Drawing	NA	-40℃ to +85℃	IP20 LED
SPEC6701	4	M8 DIP	1.8 x 2.15 x 2.6	NA	-40℃ to +85℃	M8 R/A
SPEC6702	4	M8 DIP	1.8 x 2.15 x 2.6	NA	-40℃ to +85℃	IP67 M8
SPEC6703	4	M8 DIP	1.8 x 2.15 x 2.6	NA	-40℃ to +85℃	IP67 R/A
SPEC6704	4	M8 DIP	1.8 x 2.15 x 2.6	NA	-40℃ to +85℃	IP67
SPEC6704WG	4	M8 DIP	1.8 x 2.15 x 2.6	NA	-40℃ to +85℃	non-ST
SPEC6705	8	M8 DIP	See Drawing	NA	-40℃ to +85℃	LED R/A
SPEC6706	8	M8 DIP	See Drawing	NA	-40℃ to +85℃	LED
SPEC6707	8	M8 DIP	See Drawing	NA	-40℃ to 85℃	LED R/A
SPEC6708	8	M8 DIP	See Drawing	NA	-40℃ to +85℃	LED
SPEC6709	4	M8 DIP	1.8 x 2.15 x 2.6	NA	-40℃ to +85℃	R/A
SPEC6710	4	M8 DIP	1.8 x 2.15 x 2.6	NA	-40℃ to +85℃	-
SPEC6711	4	M8 DIP	1.8 x 2.15 x 2.6	NA	-40℃ to +85℃	Light Pipe
SPEC6712	4	M8 DIP	1.8 x 2.15 x 2.6	NA	-40℃ to +85℃	Light Pipe non-ST